Visit our Customer Experience Center for all of our latest demos Register Now
Contact Sales
1/14.46" B&W 160 Kpixel (400 x 400) CMOS Image Sensor with PureCel®Plus‑S, Global Shutter, and Nyxel® Technologies
  • SKU
    OG0TC1B-A16A-001A-Z
  • Package
    CSP

World’s Smallest, Lowest-Power Global Shutter Image Sensor for AR/VR/MR Tracking Cameras

The OG0TC1B BSI global shutter (GS) image sensor for eye and face tracking in AR/VR/MR consumer headsets and glasses features on-chip single exposure DCG™ technology for ghost-free HDR imaging. It consumes less than 40% of the power at 30 fps compared with the previous-generation sensor and is pin-to-pin compatible for easy upgrades.

With a package size of just 1.64 mm x 1.64 mm, the OG0TC1B is an ultra-small, low-power image sensor for optimizing primarily inward-facing tracking cameras. It features a 2.2 µm pixel built on PureCel®Plus-S stacked-die technology. Nyxel® technology enables the best QE at the 940 nm NIR wavelength for sharp, accurate images of moving objects and the sensor’s high MTF enables sharper images with greater contrast and more detail.

The 400 x 400 resolution GS sensor supports a flexible interface, including MIPI with multi-drop and CPHY.

July 9, 2024: OMNIVISION Launches Newest Generation of the World’s Smallest, Lowest-Power Global Shutter Image Sensor for AR/VR/MR Tracking Cameras

2.2 μm x 2.2 μm pixel with PureCel®Plus-S, Global Shutter, and Nyxel® technologies

Automatic black level calibration (ABLC)

Programmable controls for:
– Frame rate
– Mirror and flip
– Cropping

Linear mode supports output formats: 8-bit/10-bit RAW

DCG™ mode supports output formats: 12-bit/14-bit RAW

Fast mode switching

Supports horizontal and vertical 2:1 subsampling

Supports 2×2 binning and skipping

Supports 4×4 skipping and 8×8 skipping

1-lane MIPI D-PHY / 1-trio C-PHY

Support for image sizes:
– 400 x 400
– 200 x 200
– 100 x 100
– 50 x 50

Embedded 22 bytes of one-time programmable (OTP) memory for customer use

Two on-chip phase lock loops (PLLs), including SSCG-PLL supporting MIPI interface

Built-in strobe control

Support for multi-sensor mode operation

Internal 1.8V LDO for GPIO, serial interface I/Os

  • Spec
    OG0TC1B
  • Analog / Digital
    Digital
  • Category
    1MP and Below
  • CFA (Chroma)
    B&W
  • Frame Rate
    200 x 200 @ 480 fps, Full @ 240 fps
  • Image Area
    915.2 x 915.2 μm
  • Interface
    MIPI
  • Optical Format
    1/14.46"
  • Output Format
    8-bit/10-bit/12-bit/14-bit RAW
  • Package
    CSP
  • Pixel Size
    2.2 µm
  • Power Requirement
    Active: 37 mW, XSHUTDOWN: 50 µA
  • Resolution
    400 x 400
  • Shutter Type
    Global Shutter
  • Technology
    DCG™, HDR, Nyxel®, PureCel®Plus‑S
  • Operating Temperature
    -30°C to +85°C
Skip to content