![](https://www.ovt.com/wp-content/uploads/2024/06/OH02B30-PRODUCT-BRIEF-IMAGE-RGB-1920x1097.jpg)
![](https://www.ovt.com/wp-content/uploads/2024/06/OH02B30-CSP-MARKED-RGB-500x333.png)
-
SKUOH02B30-A24A-001A
-
PackageCSP
High-Resolution, Small Image Sensor for 3D Intraoral Dental Scanners
The new OH02B30 is a high-performance CMOS image sensor that provides the best image quality for three-dimensional (3D) intraoral dental scanners. It features a 1.12‑micron pixel with a small size of 2.45 mm x 2.45 mm built on OMNIVISION’s PureCel®Plus‑S stacked-die technology.
The 2‑megapixel (MP) OH02B30 sensor achieves 60 frames per second (fps), and at 720p resolution, 120 fps. It comes in a 1/7.3‑inch optical format and has a MIPI high-speed digital interface for cameras in benchtop, standalone and portable intraoral scanners.
The OH02B30 is a low-power device that enhances patient comfort.
Automatic black level calibration (ABLC)
Programmable controls for:
– Frame rate
– Mirror and flip
– Binning
– Cropping
– Windowing
Support for dynamic DPC
Supports output formats: 10-bit RGB non-HDR
Supports horizontal and vertical subsampling
Supports typical images sizes:
– 1500 x 1500
– 1280 x 720
– 960 x 540
– 640 x 480
2-lane MIPI TX interface with speeds up to 1.0 Gbps/lane
Standard serial SCCB interface
HDR support: Stagger HDR 2 exposure timing
Two on-chip phase lock loops (PLLs)
Built-in temperature sensor
1.116 μm x 1.116 μm pixel
-
SpecOH02B30
-
Analog / DigitalDigital
-
Category2MP to 5MP
-
CFA (Chroma)Color
-
Frame RateFull @ 60 fps
-
Image Area1691.856 x 1691.856 μm
-
InterfaceMIPI, SCCB
-
Optical Format1/7.5"
-
Output Format10-bit RGB non-HDR
-
PackageCSP
-
Pixel Size1.116 µm
-
Power RequirementActive: 124 mW (1500 x 1500 @ 60 fps), Standby: 2 mA
-
Resolution2MP
-
Shutter TypeRolling Shutter
-
TechnologyPureCel®Plus‑S
-
Use CaseDental Mirror, Intra Oral Scanner