![OV60A 60-megapixel product brief World’s First 0.61 µm pixel, High Resolution 4K Image Sensor for High-End Mobile Phone Front Facing & Rear Facing Cameras](https://www.ovt.com/wp-content/uploads/2022/01/OV60A-PRODUCT-BRIEF-IMAGE-RGB-1920x1097.jpg)
![](https://www.ovt.com/wp-content/uploads/2022/01/OV60A-IMAGE-SENSOR.png)
-
SKUOV60A40-GA5A-001A
-
PackageCOB, RW
World’s First 0.61 µm pixel, High Resolution 4K Image Sensor for High-End Mobile Phone Front Facing & Rear Facing Cameras
OMNIVISION’s OV60A is the world’s first 0.61 micron (µm) pixel high resolution CMOS image sensor that will revolutionize the capabilities of next-generation mobile phone cameras. The OV60A offers 60‑megapixel (MP) resolution with the smallest pixel size in its class at 0.61 µm. The sensor can fit into a 1/2.8-inch optical format in either 3:4 or 16:9 aspect ratio configurations. The 4-cell color filter array on the OV60A uses near pixel binning to output up to 15MP images with 4x the sensitivity offering 1.22 µm equivalent performance for preview and native 4K video with extra pixels for electronic image stabilization (EIS). The sensor also supports low power mode for “always on” sensing that can save precious battery life when paired with the phone’s artificial intelligence functions.
Built on OMNIVISION’s PureCel®Plus-S stacked die technology, the new 0.61 µm pixel is 24 percent smaller in area than the previous generation 0.7 µm pixel solution, yet it can achieve higher Quantum Efficiency (QE) with better crosstalk and angular response than the 0.7 µm generation.
Output formats include 15MP or 4K2K with EIS resolutions at 60 frames per second and supports staggered HDR timing for high dynamic range video enablement. The “always on” low power modes include an ambient light sensing mode for wake up as well as a low power streaming mode. In addition, this sensor also can support dual I/O voltage rails (1.8V and 1.2V) as well as CPHY interface.
Automatic black level calibration (ABLC)
Programmable controls for:
– Frame rate
– Mirror and flip
– Binning
– Cropping
– Windowing
Support for dynamic DPC
Supports output formats: 10-bit RGB RAW for normal mode and 8-bit RGB Raw for ULP mode
Supports horizontal and vertical subsampling
Supports ambient light sensor (ALS) mode
Supports ultra low power (ULP) mode
Up to 4-lane MIPI D-PHY TX interface with speeds up to 3.0 Gbps/lane
2/3 trio C-PHY interface, up to 3.0 Gsps/trio
Standard serial SCCB interface
Supports typical images sizes:
– 9152 x 6592
– 4576 x 3296
– 4384 x 3288
– 4576 x 2574
– 2288 x 1648
– 1920 x 1080 and 1280 x 720 for normal mode
– 1024 x 768 and 512 x 384 for ULP mode
Supports always-on (AO)
4-cell support:
– 4-cell binning
4-cell full
HDR support: Stagger HDR 2/3 exposure timing
Three on-chip phase lock loops (PLLs)
Programmable I/O drive capability
Dual I/O power supply (1.2V/1.8V)
Built-in temperature sensor
0.612 μm pixel
-
SpecOV60A
-
Analog / DigitalDigital
-
CategoryAbove 13MP
-
CFA (Chroma)Color
-
Frame RateFull @ 15 fps
-
Image Area5640.192 x 4073.472 μm
-
InterfaceMIPI
-
Optical Format1/2.61"
-
Output FormatRAW
-
PackageCOB, RW
-
Pixel Size0.612 µm
-
Power RequirementActive: 470 mW (15MP @ 60 fps), Standby: <10 µA
-
Resolution60MP
-
Shutter TypeRolling Shutter
-
TechnologyPureCel®Plus‑S
-
Use CaseStill and Video Capturing - Front facing selfie camera, Still Image / Video Camera - Front facing selfie camera, Still Image / Video Camera - Secondary main camera (Ultrawide, Still Image / Video Camera - Selfie camera, Still Image / Video Camera - Telephoto camera, Still Image / Video Camera - Wide angle camera, Still Image / Video Camera - World facing camera