Visit our Customer Experience Center for all of our latest demos Register Now
Contact Sales

AntLinx™

Next Generation CMOS Chip-on-Tip Endoscopy Interface

Technology Benefits

Endoscopy using CMOS Chip-on-Tip is a rapidly growing and evolving market segment. There is a significant need within endoscopic imaging to incorporate a CMOS imager at the distal tip of the endoscope and for this imager to support an interface that has a high bandwidth, is low in pin count, needs a cost-effective cable and is immune to EMC/EMI and noise over a long transmission distance. All these challenges are satisfied by a new medical interface: AntLinx™, from OMNIVISION, a world leader in endoscopic imaging.

 

Next Generation CMOS Chip-on-Tip Endoscopy Interface - AntLinx™ - White Paper

Read the white paper:
Next Generation CMOS Chip-on-Tip Endoscopy Interface - AntLinx™

Reduces Size and Complexity
The implementation of an interface that uses only 4 pins for a less than 2MP image sensor, and 6 pins for up to 10MP image sensors, reduces the size and complexity at the distal tip of the endoscope as well as the cable attached to it. The compact interface enables a slim, cost-effective cable.
High Quality Images
AntLinx™ includes both 4-wire analog and digital interfaces, depending on the data throughput. The robust EMC/EMI profile and high noise immunity ensure high-quality image delivery to the CCU.
Integrated Bridge Chip
The output from the imager in AntLinx™ format is decoded by a bridge chip from OMNIVISION that resides in the back end of the endoscopic system. This bridge chip handles all the electrical and logical protocol with the imager and produces DVP or MIPI output to connect to back-end processor.

Technology Features

AntLinx™ has analog and digital features

  • For Analog
    •Analog link from imager to transfer the image data
    •Companion chip to decode data + A-to-D conversion
    •I2C reverse control embedded into analog link during vertical blanking
  • For Digital
    •VDD, GND, Dp, Dn twisted pair with data 8b/10b encoded (clock embedded) for easy clock and data recovery at the receiver side
    •SCCB and ref-clock embedded into reverse signaling or local oscillator with calibrations

AntLinx™

 

Limitations of MIPI

•MIPI output of HD / 4K2K imagers
•Requires a minimum of 12 pins → impacts size of the imager
•Requires a thicker cable and transmit up to max of 1.5 m → larger OD → patient discomfort

 

AntLinx™

•Uses only 4 pins for < 2-megapixel (MP) imagers
•Scalable architecture to use up to 8 pins for up to 10MP images
•Can transmit up to 4 m cable length
•Uses cost-effective micro-coaxial cable
•Has a robust EMC/EMI profile
•Offers high noise immunity
•Provides analog and digital signal transmission

 

Applications

OMNIVISION's AntLinx™ technology targets medical endoscopy

Product Solutions

OMNIVISION places its customers at the leading edge of imaging technology with its commitment to innovative, forward-thinking solutions.

Skip to content