Visit our Customer Experience Center for all of our latest demos Register Now
1/2.44" Color 2.46‑Megapixel (1920 x 1280) High Dynamic Range (HDR) High Definition (HD) CMOS Image Sensor with OmniBSI™‑2 Technology
  • SKU
    OX03A10-E80Y-1E
  • Package
    a-CSP™

Industry-Leading Low-Light Performance and High Dynamic Range for a Wide Range of Automotive Applications

OMNIVISION’s OX03A10 is a high-performance, low-power 3.2 µm OmniBSI™-2 image sensor designed for a wide range of advanced automotive imaging applications, including 360-degree surround view, rear view, blind-spot detection, e-mirror, and lane departure warning.

The 2.46‑megapixel sensor uses OMNIVISION’s proprietary Deep Well™ pixel technology to deliver industry-leading low-light sensitivity, and enables up to 90 dB of high dynamic range (HDR) from a single exposure without any decrease in signal-to-noise ratio and without motion artifacts. The OX03A10 also features dual-exposure HDR mode that can extend the sensor’s dynamic range to more than 120 dB.

The OX03A10 can output multiple resolution formats, including 1920 x 1280 resolution video at 50 frames per second (fps) and 1920 x 1080 resolution video at 60 fps.

The sensor comes in an AEC‑Q100 Grade 2 qualified chip-scale package or ball grid array package and has been developed according to ISO 26262 ASIL B requirements.

January 4, 2018: OMNIVISION’s New Flagship High-Resolution Automotive Image Sensor Combines Best-in-Class Low-light Sensitivity and Low Power Consumption

September 16, 2019: OMNIVISION Showcases Automotive Image Sensor Fusion Technologies, Enabling Best Imaging Quality Across All Lighting Conditions

Support for image size:
– 1920 x 1280
– 1920 x 1080
– VGA
– QVGA, and any cropped size

High dynamic range

High sensitivity

Image sensor processor functions:
– Defective pixel cancelation
– HDR combination
– Automatic black level correction
– PWL compression, etc.

Pixel data: 12b RAW RGB

SCCB for register programming

Dedicated safety features for supporting minimum ASIL B applications

Programmable GPIOs

High speed serial data transfer with MIPI CSI‑2

External frame synchronization capability

Embedded temperature sensor

One time programmable (OTP) memory

  • Spec
    OX03A10
  • Analog / Digital
    Digital
  • Category
    2MP to 5MP
  • CFA (Chroma)
    RGB Bayer
  • Frame Rate
    Full @ 50 fps
  • Image Area
    6195.2 x 4147.2 µm
  • Interface
    MIPI
  • Optical Format
    1/2.44"
  • Output Format
    RAW
  • Package
    a‑CSP™
  • Pixel Size
    3.2 µm
  • Power Requirement
    Active: Streaming @ 1280p50: 370 mW (with FuSa/ASIL off)
  • Resolution
    2.46MP
  • Shutter Type
    Rolling Shutter
  • Technology
    Deep Well™, HDR, OmniBSI™‑2
  • Use Case
    Viewing Applications - E-mirrors, Viewing Applications - Rear View Camera, Viewing Applications - Surround View Camera
  • Operating Temperature
    -40°C to +125°C
Skip to content