Visit our Customer Experience Center for all of our latest demos Register Now
OV32A 0.8 Micron, 32-Megapixel Image Sensor for High-End Smartphones
1/2.75" Color 32‑Megapixel (6528 x 4896) CMOS Image Sensor with PureCel®Plus‑S Technology
  • End-of-Life
    Not available

0.8‑Micron, 32‑Megapixel Image Sensor for High-End Smartphones

OMNIVISION’s OV32A is a 0.8‑micron pixel image sensor with 32‑megapixel (MP) resolution. Built on our PureCel®Plus stacked die technology, the OV32A offers leading-edge performance for high-end smartphones. It provides a compact form factor, combined with many advanced features.

The OV32A’s submicron 0.8µ pixel size can provide leading-edge 32MP resolution with a 1/2.8 inch optical format. It uses a 4-cell color filter array, and features on-chip re-mosaic, for full-resolution, 32MP Bayer output in normal light conditions. In low light conditions, the OV32A can use near-pixel binning to output an 8MP image with 4 times the sensitivity. It can output a variety of formats, including 32MP at 15 frames per second (fps), 8MP with 4-cell binning at 60 fps, 4K2K video at 60 fps, 1080p video at 120 fps and 720p video at 240 fps. Additionally, its pad locations on the top and bottom of the image sensor reduce module size in the x-direction, which is ideal for front-facing cameras in thin-bezel, infinity-display smartphones.

February 20, 2019: OMNIVISION Announces Its First 0.8 Micron, 32‑Megapixel Image Sensor

Automatic black level calibration (ABLC)

Programmable controls for:
– Frame rate
– Mirror and flip
– Binning
– Cropping
– Windowing

Support for dynamic DPC cancellation

Supports output formats:
– 10-bit RGB 4-cell (4C) pattern
– Bayer RAW

Supports horizontal and vertical subsampling

Supports typical images sizes:
– 6528 x 4896
– 3264 x 2448
– 1920 x 1080
– 1280 x 720

Standard serial SCCB interface

Up to 4-lane MIPI TX interface with speed up to 2.5 Gbps/lane

2/3 trio CPHY interface, up to 2.0 Gsps/trio

Programmable I/O drive capability

Embedded 16k bits of one-time programmable (OTP) memory (4k bits reserved for customer use)

4-cell support:
– 4-cell binning
– 4-cell full
– 4-cell HDR timing

On-chip 4-cell to Bayer converter

Three on-chip phase lock loops (PLLs)

Programmable I/O drive capability

Built-in temperature sensor

Typical module size: 9 x 9 x ~5.5 mm

  • Spec
    OV32A
  • Analog / Digital
    Digital
  • Category
    Above 13MP
  • CFA (Chroma)
    4-Cell, RGB Bayer
  • Frame Rate
    6528 x 4896 (4C pattern): 24 fps, 6528 x 4896 with 4C-to-Bayer converter enabled (Bayer pattern) @ 15 fps
  • Image Area
    5254.56 x 3947.328 µm
  • Interface
    MIPI
  • Optical Format
    1/2.75"
  • Output Format
    10-bit RGB 4-cell pattern, RAW
  • Package
    COB, RW
  • Pixel Size
    0.8 µm
  • Power Requirement
    324 mW for 8MP Bayer @ 60 fps, Active: 473 mW for 32MP Bayer @ 15 fps, XSHUTDOWN: 1.5 µA
  • Resolution
    32MP
  • Shutter Type
    Rolling Shutter
  • Technology
    HDR, PureCel®Plus‑S
  • Use Case
    Bokeh or Macro camera), Still Image / Video Camera - Front facing selfie camera, Still Image / Video Camera - Secondary main camera (Ultrawide, Still Image / Video Camera - Wide angle camera, Video
  • Operating Temperature
    -30°C to +85°C
Skip to content